Water Production and Daily Activity | Adapt FCS Version 1 | November 2026 Fictional demonstration data and illustrative targets. Introduction Explore how Adapt FCS organizes water-production readings and daily activity. We will review source references, inspect an operating record, switch to its flow trend, and finish with a plant-check note. The demonstration uses seeded readings and does not connect to live equipment. Start with the configured water sources Open Water Production, then Water Sources. The register identifies the distribution system, Cedar River Treatment Plant, and Valley Wellfield, along with source type, operating team, and active status. These shared references give the operating records a consistent source identity. The names and locations are fictional. Review the operating reading series Choose Production Readings to see the existing interval records beside the operating report. The demonstration contains ninety-six seeded readings. Each record carries a source and time reference. Flow, pressure, reservoir level, and chlorine residual can be reviewed together rather than kept in unrelated lists. Inspect an individual reading and its origin Open reading zero zero eight nine. Its source is the river plant, with a recorded time, flow in million gallons per day, pressure in pounds per square inch, reservoir level in feet, and a chlorine residual entry. Reading Origin says Demo manual interval, and the note explicitly states that no SCADA connection is active. Switch from the report to the flow chart Return to the reading view and select Production Flow Trend. Expand the pane for a clearer chart. This is another view of the recorded demonstration series. Staff should confirm the source selection, timestamps, and units when using operating trends. The chart does not imply live telemetry, forecasting, or an equipment-control connection. Review the daily activity log For the narrative context, open Sampling and Sites and choose Daily Activity Log. The view combines sampling, laboratory review, and water-production activity notes. Dates, teams, activity types, staff names, and summaries help staff review what was recorded around the operating work. These entries are maintained by staff. Inspect a plant-check entry Open a plant-check example. The record brings its activity date, site reference, Water Production team, recorded-by name, summary, and details together. It provides descriptive context alongside the numeric readings. We have inspected existing records without changing them. Live ingestion, automated alarms, and device integration remain outside this walkthrough.