WEBVTT

1
00:00:00.600 --> 00:00:05.634
Explore how Adapt FCS organizes water-production readings and daily activity.

2
00:00:05.634 --> 00:00:13.780
We will review source references, inspect an operating record, switch to its flow
trend, and finish with a plant-check note.

3
00:00:13.780 --> 00:00:18.946
The demonstration uses seeded readings and does not connect to live equipment.

4
00:00:20.358 --> 00:00:23.041
Open Water Production, then Water Sources.

5
00:00:23.041 --> 00:00:33.316
The register identifies the distribution system, Cedar River Treatment Plant, and
Valley Wellfield, along with source type, operating team, and active status.

6
00:00:33.316 --> 00:00:38.486
These shared references give the operating records a consistent source identity.

7
00:00:38.486 --> 00:00:40.973
The names and locations are fictional.

8
00:00:42.273 --> 00:00:48.232
Choose Production Readings to see the existing interval records beside the
operating report.

9
00:00:48.232 --> 00:00:51.703
The demonstration contains ninety-six seeded readings.

10
00:00:51.703 --> 00:00:54.781
Each record carries a source and time reference.

11
00:00:54.781 --> 00:01:02.378
Flow, pressure, reservoir level, and chlorine residual can be reviewed together
rather than kept in unrelated lists.

12
00:01:03.678 --> 00:01:05.850
Open reading zero zero eight nine.

13
00:01:05.850 --> 00:01:17.433
Its source is the river plant, with a recorded time, flow in million gallons per
day, pressure in pounds per square inch, reservoir level in feet, and a chlorine
residual entry.

14
00:01:17.433 --> 00:01:24.541
Reading Origin says Demo manual interval, and the note explicitly states that no
SCADA connection is active.

15
00:01:25.841 --> 00:01:29.653
Return to the reading view and select Production Flow Trend.

16
00:01:29.653 --> 00:01:31.914
Expand the pane for a clearer chart.

17
00:01:31.914 --> 00:01:35.596
This is another view of the recorded demonstration series.

18
00:01:35.596 --> 00:01:41.539
Staff should confirm the source selection, timestamps, and units when using
operating trends.

19
00:01:41.539 --> 00:01:47.288
The chart does not imply live telemetry, forecasting, or an equipment-control
connection.

20
00:01:48.588 --> 00:01:53.813
For the narrative context, open Sampling and Sites and choose Daily Activity Log.

21
00:01:53.813 --> 00:01:59.168
The view combines sampling, laboratory review, and water-production activity
notes.

22
00:01:59.168 --> 00:02:06.875
Dates, teams, activity types, staff names, and summaries help staff review what
was recorded around the operating work.

23
00:02:06.875 --> 00:02:09.357
These entries are maintained by staff.

24
00:02:10.657 --> 00:02:12.376
Open a plant-check example.

25
00:02:12.376 --> 00:02:20.509
The record brings its activity date, site reference, Water Production team,
recorded-by name, summary, and details together.

26
00:02:20.509 --> 00:02:24.609
It provides descriptive context alongside the numeric readings.

27
00:02:24.609 --> 00:02:28.312
We have inspected existing records without changing them.

28
00:02:28.312 --> 00:02:34.197
Live ingestion, automated alarms, and device integration remain outside this
walkthrough.
